Skip to content
Factory visits & supplier audits welcome by appointmentsales@tuolango.com
TUOLAN TRADE TUOLAN TRADEGLOBAL SOURCING · RELIABLE SUPPLY Contact Us

Optical Components / Visible & VIS-NIR Lenses / 22.6 mm VIS–NIR Low-Light Objective

VIS-NIR – low-light objectives

22.6 mm VIS–NIR Low-Light Objective

Extended visible-to-near-infrared objective for 1080p low-light imaging.

Focal length22.6 mm
F/#1.3
Working wavelength450–1000 nm
Detector reference1920 × 1080 / 12 μm
22.6 mm VIS–NIR Low-Light Objective
22.6 mm VIS–NIR Low-Light Objective – reference image. Final coating, mount and marking are confirmed on the approved drawing.

Full parameter record

22.6 mm VIS–NIR Low-Light Objective – published specifications

Every value below is the reference record for this configuration. Values marked as a reference, a target or a minimum are confirmed against the detector datasheet and the approved drawing before a quotation is issued.

Parameter Published value
Focal length 22.6 mm
F/# 1.3
Working wavelength 450–1000 nm
Detector reference 1920 × 1080 / 12 μm
Field of view 53.4° × 31.8°
Average transmission ≥94%
Distortion 2.45%
Focus Manual
Weight ≤43 g
Dimensions Φ26.4 × 38.83 mm
Operating / storage −40 to +60 °C / −50 to +70 °C
Sealing reference Front element IP67
Reference policy: the signed quotation, approved drawing, sample and inspection plan define the delivered performance, coating, sealing, MOQ and lead time. Values published here are engineering references for screening, not a guaranteed specification.

Before this configuration is released

What to confirm with us

Send these five inputs and the quotation can be prepared against your system rather than against a catalogue headline.

01Image format and pixel pitch of the sensor the objective will serve
02Required field of view, F-number and the distortion limit at the field edge
03Low-light level, spectral range and the coating reference for the working band
04Mount thread, back focal distance, mass and the mechanical envelope
05Sealing and shock requirements, plus the sample and inspection documents required

Send the detector data and we will confirm the fit.

Share the detector type, resolution, pixel pitch, required field of view and the mechanical envelope. We will return the configuration route, the documents we can issue and the next sourcing step.

Send an RFQ

WhatsApp